Abricot

You should try to open it as little as possible and close it as quickly as possible!

A little tip to beat the heat: the fridge is the best place to store it! Reducing the temperature helps prevent the polish from evaporating and slows down the rate at which the ingredients deteriorate.

You will find the full list of ingredients on the “Ingredients” tab of the product description page.

Our product ranges are green and clean with up to 84% plant-based ingredients (of natural origin). They are also free of endocrine disruptors, monomers and hydroquinone.

You can also rest assured that the Green™ range is vegan, certified by the Vegan Society.

We are always on the lookout for an alternative to this product, as animal welfare is particularly important to us!

Unfortunately not, each formula is unique and made from different ingredients. Our Green Flash™ products should only be used with products from the same range to ensure the best results.

Our Green™ polish is recommended for ages 12+.

It all depends on the thickness of your coats, but if you use our Quick-Dry Drops, you can halve the drying time of your Green™ polish (by 51% to be precise, according to recent studies)!

The nail prep step is a very important way to make sure your polish lasts:

1) File your nails into your preferred shape using our emery board. Use the fine grain (Manucurist logo) for your fingernails and the coarser grain for your toenails.
2) Push back your cuticles. Apply our Cuticle Remover to the nail contour. Leave to work for 2 minutes, then push back the cuticles with a cuticle pusher.
3) File the surface of your nails using our buffer. This is designed to smooth, buff and open up the nail plate to help the polish adhere better.
4) Remove all traces of oil and/or impurities using our Nail Oil Remover to help the polish adhere better and last longer.

Then apply your Green™ polish by following the steps below. Carry out each step on all 10 fingers before moving on to the next step:

1) Apply a thin layer of Base Coat immediately after the Nail Oil Remover.
2) Apply 2 thin coats of colour once the Base Coat is dry. Wait a little while between each coat for it to dry slightly.
3) Apply 1 thin layer of Top Coat.
4) Apply 1 Quick-Dry Drop to the middle of each nail after applying the Top Coat.
Apply the polish in thin coats and wait 1-2 minutes between each coat!

For more tips and personalised advice, book a free virtual consultation with one of our manicure experts here!

If you are wearing Green™ polish, you can reapply a layer of our Sunshine Top Coat to refresh its shine after a few days.

Yes, you can use any of our treatment base coats as part of your Green™ manicure, e.g. S.O.S. Base Coat, Force Base Coat or 5.5 Base Coat. These base coats are designed to strengthen your nails, while helping your Green™ polish to adhere properly.